Alloy wheel powder coating in East London

At our Crown Road workshop each wheel is stripped to bare metal, then coated and cured in our own oven at 180°C. The finish can be the original colour or any shade from a paint code or photo. Send a photo from East London and we'll reply within 24 hours with a price.

Get a workshop quote WhatsApp a photo

How we do powder coating at Crown Road

We take the wheel back

We take the wheel back to bare metal, so none of the old coating is left underneath.

Kerb scuffs, pits and rim

Kerb scuffs, pits and rim damage are repaired while the metal is exposed.

Powder goes on in the

Powder goes on in the colour you've chosen.

The wheel is cured in

The wheel is cured in our on-site oven at 180°C, which bonds the powder into a hard finish. More on alloy wheel powder coating.

Looking after the finish afterwards

A cured powder coat is tough, but brake dust and road salt still settle on it every time you use the car. Wash the wheels with a cleaner made for alloys and a soft brush, and rinse them well, including the inner barrel and the gaps between the spokes. Through winter, rinse the salt off more often than you would in summer. Each wash is also a chance to look over the rims, because a fresh kerb mark or chip spotted early is a smaller job than one left to spread under the coating.

Get a photo quote Call 020 7060 3666

Ready when you are

Powder coating takes 36 to 48 hours, so send a photo of the wheels and the finish you have in mind.

Get a workshop quote

Why it all happens in one workshop

An on-site oven at 180°C Your wheels stay at Crown Road from the first strip to the final cure, so nothing travels elsewhere to be coated.

Get a free photo quote

An on-site oven at 180°C

Your wheels stay at Crown Road from the first strip to the final cure, so nothing travels elsewhere to be coated.

1,400+ five-star reviews

Drivers have left us more than 1,400 five-star reviews on Trustpilot, and Shmee150 has made a video review of his wheels with us.

Video review

Shmee150 on our workshop

Shmee150 Testimonial For Whoops Wheel Fix It

Powder coating questions from East London

Does any of the work get sent out to another company?

Everything stays with us at Crown Road. The stripping, repairs, coating and oven cure are all done by our own team.

What does curing at 180°C actually do?

The heat bonds the powder to the bare metal and leaves a thicker, harder finish than wet paint. That is what helps it stand up to stone chips and brake dust.

Do you work on vans and company cars?

We coat wheels for personal and commercial vehicles, with competitive bulk rates for trade and fleet customers. Call 0207 060 3666 to talk it through.

Book powder coating in East London

Tell us the colour you want along with a photo of the wheels, and the quote will cover the lot. Unit 1, 38 Crown Road, Enfield, EN1 1TH · Mon-Fri 8am-6pm · Sat 8am-1pm

Get a workshop quote WhatsApp a photo