Audi S3 diamond cut alloys and body repair

Your Audi S3 stays with one team at Crown Road, from the first strip of a wheel to the last coat on a panel. Diamond cut faces are re-cut on our CNC lathe, and paint is matched from the car's code. Send a photo and we reply with a price within 24 hours.

Get a workshop quote WhatsApp a photo

How your S3 wheels are repaired at Crown Road

More than 1,400 five-star Trustpilot reviews come from customers whose wheels went through these steps.

Take the old finish off

Take the old finish off the wheel, back to bare metal.

Repair the damage, from kerb

Repair the damage, from kerb gouges to bends and cracks, using our welding and straightening kit.

Apply the new finish

powder coat cured at 180°C, matched paint, or a re-cut diamond cut face.

Inspect the result before you

Inspect the result before you collect. A standard refurbishment takes 36 to 48 hours, and a diamond cut repair takes 2 working days.

Spray gun laying down colour in a workshop

Wheels and paintwork in one booking

If the S3 has a kerbed wheel and a scuffed bumper, there's no need to book twice. Send one set of photos covering both and you get a single quote for the lot. Everything is done in the same workshop, with the bodywork colour-matched from the paint code. Minor bodywork is usually done within 24 hours, so it can fit around the days the wheels need.

Get a photo quote Call 020 7060 3666

Diamond cut, refurbishment and kerb damage

Diamond cut alloys If your S3 has diamond cut wheels, the face is cut fresh on the lathe and lacquered. See diamond cut repair.

Get a free photo quote

Diamond cut alloys

If your S3 has diamond cut wheels, the face is cut fresh on the lathe and lacquered. See diamond cut repair.

Alloy wheel refurbishment

Each wheel is rebuilt on clean bare metal and finished to match or recoloured. See alloy wheel refurbishment.

Kerb damage and bends

Gouged rims are reshaped, and bent ones straightened in-house. See straightening and welding.

Questions about the work on your Audi S3

Does my S3 leave the workshop for any part of the repair?

None of it goes elsewhere. The lathe, the oven, the welding and the paint are all at Crown Road, which means one workshop is responsible from photo to finish.

What does the CNC lathe do on a diamond cut S3 wheel?

When the wheel is diamond cut, the lathe takes a thin fresh cut across the face to give back the bright finish, and lacquer then protects it. Allow 2 working days.

Can you straighten an S3 wheel bent by a pothole?

We straighten bent rims and weld cracks on site. Send a photo before you book, and we'll tell you if the wheel is safe to repair.

Book your wheels into the workshop

Photograph the wheels and the marked paintwork on your S3 together, and one quote comes back for both. Or call us on 0207 060 3666

Get a workshop quote